Microsoft Remote Desktop Mac To Pc

  1. Microsoft Remote Desktop Mac To Windows
  2. Microsoft Remote Desktop For Mac Download
  3. Microsoft Remote Desktop Mac To Pc Free
  4. Microsoft Remote Desktop On Mac To Pc
  1. Jan 07, 2019  In the search box, type Remote Desktop Connection, and then, in the list of results, click Remote Desktop Connection. In the Computer box, type the name of the computer that you want to connect to, and then click Connect.
  2. Open the Launchpad icon and click on the Remote Desktop app icon or try to look for Microsoft Remote Desktop. Enable remote access from Mac to PC. The administrator password is needed to complete this step. Select 'Allow remote connections to this computer' in the System Properties. Select the users who will be able to access through remote desktop connection.

When copying files from Mac to PC using Microsoft Remote Desktop I prefer to share a subfolder, not the entire drive. Here's how: In Remote Desktop on your Mac select your PC in the 'My Desktops' section. Click the 'Edit' button (pencil icon). In the popup click the. Microsoft Remote Desktop 8 - how do I download the app on PC? If you want to download the software on your pc or mac, you could either first visit the Mac store or Windows AppStore and search for the app OR you can easily use any of the download links we provided above under the 'Download and Install' header section to download the application.

-->

Applies to: Windows 10, Windows 8.1, Windows Server 2019, Windows Server 2016, Windows Server 2012 R2

Now that you've set up the Remote Desktop client on your device (Android, Mac, iOS, or Windows), you may have questions. Here are answers to the most commonly asked questions about the Remote Desktop clients.

The majority of these questions apply to all of the clients, but there are a few client specific items.

If you have additional questions that you'd like us to answer, leave them as feedback on this article.

Setting up

Which PCs can I connect to?

Check out the supported configuration article for information about what PCs you can connect to.

How do I set up a PC for Remote Desktop?

I have my device set up, but I don't think the PC's ready. Help?

First, have you seen the Remote Desktop Setup Wizard? It walks you through getting your PC ready for remote access. Download and run that tool on your PC to get everything set.

Otherwise, if you prefer to do things manually, read on.

For Windows 10, do the following:

  1. On the device you want to connect to, open Settings.
  2. Select System and then Remote Desktop.
  3. Use the slider to enable Remote Desktop.
  4. In general, it's best to keep the PC awake and discoverable to facilitate connections. Click Show settings to go to the power settings for your PC, where you can change this setting.

    Note

    You can't connect to a PC that's asleep or hibernating, so make sure the settings for sleep and hibernation on the remote PC are set to Never. (Hibernation isn't available on all PCs.)

Make note of the name of this PC under How to connect to this PC. You'll need this to configure the clients.

You can grant permission for specific users to access this PC - to do that, click Select users that can remotely access this PC.Members of the Administrators group automatically have access.

For Windows 8.1, follow the instructions to allow remote connections in Connect to another desktop using Remote Desktop Connections.

.To start the download, click the Download button and then do one of the following, or select another language from Change Language and then click Change. Command line instructions can be found in Knowledge Base article. Click Save to copy the download to your computer for installation at a later timeIT professional resourcesIT professional working in managed environments can find complete resources for deploying Office updates in an organization on the. Download microsoft project professional 2013. Click Run to start the installation immediately.

Connection, gateway, and networks

Why can't I connect using Remote Desktop?

Here are some possible solutions to common problems you might encounter when trying to connect to a remote PC. If these solutions don't work, you can find more help on the Microsoft Community website.

  • Microsoft outlook for mac gif in email. The remote PC can't be found. Make sure you have the right PC name, and then check to see if you entered that name correctly. If you still can't connect, try using the IP address of the remote PC instead of the PC name.

  • There's a problem with the network. Make sure you have internet connection.

  • The Remote Desktop port might be blocked by a firewall. If you're using Windows Firewall, follow these steps:

    1. Open Windows Firewall.

    2. Click Allow an app or feature through Windows Firewall.

    3. Click Change settings. You might be asked for an admin password or to confirm your choice.

    4. Under Allowed apps and features, select Remote Desktop, and then tap or click OK.

      If you're using a different firewall, make sure the port for Remote Desktop (usually 3389) is open.

  • Remote connections might not be set up on the remote PC. To fix this, scroll back up to How do I set up a PC for Remote Desktop? question in this topic.

  • The remote PC might only allow PCs to connect that have Network Level Authentication set up.

  • The remote PC might be turned off. You can't connect to a PC that's turned off, asleep, or hibernating, so make sure the settings for sleep and hibernation on the remote PC are set to Never (hibernation isn't available on all PCs.).

Why can't I find or connect to my PC?

Check the following:

  • Is the PC on and awake?

  • Did you enter the right name or IP address?

    Important

    Using the PC name requires your network to resolve the name correctly through DNS. In many home networks, you have to use the IP address instead of the host name to connect.

  • Is the PC on a different network? Did you configure the PC to let outside connections through? Check out Allow access to your PC from outside your network for help.

  • Are you connecting to a supported Windows version?

    Note

    Windows XP Home, Windows Media Center Edition, Windows Vista Home and Windows 7 Home or Starter are not supported without 3rd party software.

Why can't I sign in to a remote PC?

If you can see the sign-in screen of the remote PC but you can't sign in, you might not have been added to the Remote Desktop Users Group or to any group with administrator rights on the remote PC. Ask your system admin to do this for you.

Which connection methods are supported for company networks?

If you want to access your office desktop from outside your company network, your company must provide you with a means of remote access. The RD Client currently supports the following:

  • Terminal Server Gateway or Remote Desktop Gateway
  • Remote Desktop Web Access
  • VPN (through iOS built-in VPN options)

VPN doesn't work

VPN issues can have several causes. The first step is to verify that the VPN works on the same network as your PC or Mac computer. If you can't test with a PC or Mac, you can try to access a company intranet web page with your device's browser.

Other things to check:

  • The 3G network blocks or corrupts VPN. There are several 3G providers in the world who seem to block or corrupt 3G traffic. Verify VPN connectivity works correctly for over a minute.
  • L2TP or PPTP VPNs. If you are using L2TP or PPTP in your VPN, please set Send All Traffic to ON in the VPN configuration.
  • VPN is misconfigured. A misconfigured VPN server can be the reason why the VPN connections never worked or stopped working after some time. Ensure testing with the iOS device's web browser or a PC or Mac on the same network if this happens.

How can I test if VPN is working properly?

Verify that VPN is enabled on your device. You can test your VPN connection by going to a webpage on your internal network or using a web service which is only available via the VPN.

How do I configure L2TP or PPTP VPN connections?

If you are using L2TP or PPTP in your VPN, make sure to set Send all traffic to ON in the VPN configuration.

Web client

Which browsers can I use?

The web client supports Microsoft Edge, Internet Explorer 11, Mozilla Firefox (v55.0 and later), Safari, and Google Chrome.

What PCs can I use to access the web client?

The web client supports Windows, macOS, Linux, and ChromeOS. Mobile devices are not supported at this time.

Can I use the web client in a Remote Desktop deployment without a gateway?

No. The client requires a Remote Desktop Gateway to connect. Don't know what that means? Ask your admin about it.

Does the Remote Desktop web client replace the Remote Desktop Web Access page?

No. The Remote Desktop web client is hosted at a different URL than the Remote Desktop Web Access page. You can use either the web client or the Web Access page to view the remote resources in a browser.

Can I embed the web client in another web page?

This feature is not supported at the moment.

Monitors, audio, and mouse

How do I use all of my monitors?

To use two or more screens, do the following:

  1. Right-click the remote desktop that you want to enable multiple screens for, and then click Edit.
  2. Enable Use all monitors and Full screen.

Is bi-directional sound supported?

Bi-directional sound can be configured in the Windows client on a per-connection basis. The relevant settings can be accessed in the Remote audio section of the Local Resources options tab.

What can I do if the sound won't play?

Sign out of the session (don't just disconnect, sign all the way out), and then sign in again.

Mac client - hardware questions

Is retina resolution supported?

Yes, the remote desktop client supports retina resolution.

How do I enable secondary right-click?

In order to make use of the right-click inside an open session you have three options:

  • Standard PC two button USB mouse
  • Apple Magic Mouse: To enable right-click, click System Preferences in the dock, click Mouse, and then enable Secondary click.
  • Apple Magic Trackpad or MacBook Trackpad: To enable right-click, click System Preferences in the dock, click Mouse, and then enable Secondary click.

Is AirPrint supported?

No, the Remote Desktop client doesn't support AirPrint. (This is true for both Mac and iOS clients.)

Why do incorrect characters appear in the session?

If you are using an international keyboard, you might see an issue where the characters that appear in the session do match the characters you typed on the Mac keyboard.

This can occur in the following scenarios:

  • You are using a keyboard that the remote session does not recognize. When Remote Desktop doesn't recognize the keyboard, it defaults to the language last used with the remote PC.
  • You are connecting to a previously disconnected session on a remote PC and that remote PC uses a different keyboard language than the language you are currently trying to use.

You can fix this issue by manually setting the keyboard language for the remote session. See the steps in the next section.

How do language settings affect keyboards in a remote session?

There are many types of Mac keyboard layouts. Some of these are Mac specific layouts or custom layouts for which an exact match may not be available on the version of Windows you are remoting into. The remote session maps your keyboard to the best matching keyboard language available on the remote PC.

If your Mac keyboard layout is set to the PC version of the language keyboard (for example, French – PC) all your keys should be mapped correctly and your keyboard should just work.

If your Mac keyboard layout is set to the Mac version of a keyboard (for example, French) the remote session will map you to the PC version of the French language. Some of the Mac keyboard shortcuts you are used to using on OSX will not work in the remote Windows session.

If your keyboard layout is set to a variation of a language (for example, Canadian-French) and if the remote session cannot map you to that exact variation, the remote session will map you to the closest language (for example, French). Some of the Mac keyboard shortcuts you are used to using on OSX will not work in the remote Windows session.

If your keyboard layout is set to a layout the remote session cannot match at all, your remote session will default to give you the language you last used with that PC. In this case, or in cases where you need to change the language of your remote session to match your Mac keyboard, you can manually set the keyboard language in the remote session to the language that is the closest match to the one you wish to use as follows.

Use the following instructions to change the keyboard layout inside the remote desktop session:

On Windows 10 or Windows 8:

  1. From inside the remote session, open Region and Language. Click Start > Settings > Time and Language. Open Region and Language.
  2. Add the language you want to use. Then close the Region and Language window.
  3. Now, in the remote session, you'll see the ability to switch between languages. (In the right side of the remote session, near the clock.) Click the language you want to switch to (such as Eng).

You might need to close and restart the application you are currently using for the keyboard changes to take effect.

Specific errors

Why do I get an 'Insufficient privileges' error?

You are not allowed to access the session you want to connect to. The most likely cause is that you are trying to connect to an admin session. Only administrators are allowed to connect to the console. Verify that the console switch is off in the advanced settings of the remote desktop. If this is not the source of the problem, please contact your system administrator for further assistance.

Why does the client say that there is no CAL?

When a remote desktop client connects to a Remote Desktop server, the server issues a Remote Desktop Services Client Access License (RDS CAL) stored by the client. Whenever the client connects again it will use its RDS CAL and the server will not issue another license. The server will issue another license if the RDS CAL on the device is missing or corrupt. When the maximum number of licensed devices is reached the server will not issue new RDS CALs. Contact your network administrator for assistance.

Why did I get an 'Access Denied' error?

The 'Access Denied' error is a generated by the Remote Desktop Gateway and the result of incorrect credentials during the connection attempt. Verify your username and password. If the connection worked before and the error occurred recently, you possibly changed your Windows user account password and haven't updated it yet in the remote desktop settings.

What does 'RPC Error 23014' or 'Error 0x59e6' mean?

In case of an RPC error 23014 or Error 0x59E6 try again after waiting a few minutes, the RD Gateway server has reached the maximum number of active connections. Depending on the Windows version running on the RD Gateway the maximum number of connections differs: The Windows Server 2008 R2 Standard implementation limits the number of connections to 250. The Windows Server 2008 R2 Foundation implementation limits the number of connections to 50. All other Windows implementations allow an unlimited number of connections.

What does the 'Failed to parse NTLM challenge' error mean?

This error is caused by a misconfiguration on the remote PC. Make sure the RDP security level setting on the remote PC is set to 'Client Compatible.' (Talk to your system admin if you need help doing this.)

What does 'TS_RAP You are not allowed to connect to the given host' mean?

This error happens when a Resource Authorization Policy on the gateway server stops your user name from connecting to the remote PC. This can happen in the following instances:

  • The remote PC name is the same as the name of the gateway. Then, when you try to connect to the remote PC, the connection goes to the gateway instead, which you probably don't have permission to access. If you need to connect to the gateway, do not use the external gateway name as PC name. Instead use 'localhost' or the IP address (127.0.0.1), or the internal server name.
  • Your user account isn't a member of the user group for remote access.
-->

Applies To: Windows 10, Windows 8.1, Windows Server 2012 R2, Windows Server 2016

You can use the Remote Desktop client for Mac to work with Windows apps, resources, and desktops from your Mac computer. Use the following information to get started - and check out the FAQ if you have questions.

Note

  • Curious about the new releases for the macOS client? Check out What's new for Remote Desktop on Mac?
  • The Mac client runs on computers running macOS 10.10 and newer.
  • The information in this article applies primarily to the full version of the Mac client - the version available in the Mac AppStore. Test-drive new features by downloading our preview app here: beta client release notes.

Get the Remote Desktop client

Follow these steps to get started with Remote Desktop on your Mac:

  1. Download the Microsoft Remote Desktop client from the Mac App Store.
  2. Set up your PC to accept remote connections. (If you skip this step, you can't connect to your PC.)
  3. Add a Remote Desktop connection or a remote resource. You use a connection to connect directly to a Windows PC and a remote resource to use a RemoteApp program, session-based desktop, or a virtual desktop published on-premises using RemoteApp and Desktop Connections. This feature is typically available in corporate environments.

What about the Mac beta client?

We're testing new features on our preview channel on AppCenter. Want to check it out? Go to Microsoft Remote Desktop for Mac and click Download. You don't need to create an account or sign into AppCenter to download the beta client.

If you already have the client, you can check for updates to ensure you have the latest version. In the beta client, click Microsoft Remote Desktop Beta at the top, and then click Check for updates.

Add a Remote Desktop connection

To create a remote desktop connection:

  1. In the Connection Center, click +, and then click Desktop.

  2. Enter the following information:

    • PC name - the name of the computer.
      • This can be a Windows computer name (found in the System settings), a domain name, or an IP address.
      • You can also add port information to the end of this name, like MyDesktop:3389.
    • User Account - Add the user account you use to access the remote PC.
      • For Active Directory (AD) joined computers or local accounts, use one of these formats: user_name, domainuser_name, or user_name@domain.com.
      • For Azure Active Directory (AAD) joined computers, use one of these formats: AzureADuser_name or AzureADuser_name@domain.com.
      • You can also choose whether to require a password.
      • When managing multiple user accounts with the same user name, set a friendly name to differentiate the accounts.
      • Manage your saved user accounts in the preferences of the app.

  3. You can also set these optional settings for the connection:

    • Set a friendly name
    • Add a Gateway
    • Set the sound output
    • Swap mouse buttons
    • Enable Admin Mode
    • Redirect local folders into a remote session
    • Forward local printers
    • Forward Smart Cards

  4. Click Save.

To start the connection, just double-click it. The same is true for remote resources.

Export and import connections

Microsoft Remote Desktop Mac To Windows

You can export a remote desktop connection definition and use it on a different device. Remote desktops are saved in separate .RDP files.

  1. In the Connection Center, right-click the remote desktop.
  2. Click Export.
  3. Browse to the location where you want to save the remote desktop .RDP file.
  4. Click OK.

Use the following steps to import a remote desktop .RDP file.

  1. In the menu bar, click File > Import.
  2. Browse to the .RDP file.
  3. Click Open.

Add a remote resource

Remote resources are RemoteApp programs, session-based desktops, and virtual desktops published using RemoteApp and Desktop Connections.

  • The URL displays the link to the RD Web Access server that gives you access to RemoteApp and Desktop Connections.
  • The configured RemoteApp and Desktop Connections are listed.

To add a remote resource:

  1. In the Connection Center click +, and then click Add Remote Resources.
  2. Enter information for the remote resource:
    • Feed URL - The URL of the RD Web Access server. You can also enter your corporate email account in this field – this tells the client to search for the RD Web Access Server associated with your email address.
    • User name - The user name to use for the RD Web Access server you are connecting to.
    • Password - The password to use for the RD Web Access server you are connecting to.
  3. Click Save.

The remote resources will be displayed in the Connection Center.

Connect to an RD Gateway to access internal assets

A Remote Desktop Gateway (RD Gateway) lets you connect to a remote computer on a corporate network from anywhere on the Internet. You can create and manage your gateways in the preferences of the app or while setting up a new desktop connection.

To set up a new gateway in preferences:

  1. In the Connection Center, click Preferences > Gateways.
  2. Click the + button at the bottom of the table Enter the following information:
    • Server name – The name of the computer you want to use as a gateway. This can be a Windows computer name, an Internet domain name, or an IP address. You can also add port information to the server name (for example: RDGateway:443 or 10.0.0.1:443).
    • User name - The user name and password to be used for the Remote Desktop gateway you are connecting to. You can also select Use connection credentials to use the same user name and password as those used for the remote desktop connection.

Manage your user accounts

When you connect to a desktop or remote resources, you can save the user accounts to select from again. You can manage your user accounts by using the Remote Desktop client.

To create a new user account:

  1. In the Connection Center, click Settings > Accounts.
  2. Click Add User Account.
  3. Enter the following information:
    • User Name - The name of the user to save for use with a remote connection. You can enter the user name in any of the following formats: user_name, domainuser_name, or user_name@domain.com.
    • Password - The password for the user you specified. Every user account that you want to save to use for remote connections needs to have a password associated with it.
    • Friendly Name - If you are using the same user account with different passwords, set a friendly name to distinguish those user accounts.
  4. Tap Save, and then tap Settings.

Customize your display resolution

You can specify the display resolution for the remote desktop session.

  1. In the Connection Center, click Preferences.
  2. Click Resolution.
  3. Click +.
  4. Enter a resolution height and width, and then click OK.

To delete the resolution, select it, and then click -.

Displays have separate spacesIf you are running Mac OS X 10.9 and disabled Displays have separate spaces in Mavericks (System Preferences > Mission Control), you need to configure this setting in the remote desktop client using the same option.

Drive redirection for remote resources

Microsoft Remote Desktop For Mac Download

Drive redirection is supported for remote resources, so that you can save files created with a remote application locally to your Mac. The redirected folder is always your home directory displayed as a network drive in the remote session.

Note

Microsoft remote desktop mac os

In order to use this feature, the administrator needs to set the appropriate settings on the server.

Use a keyboard in a remote session

Microsoft Remote Desktop Mac To Pc Free

Mac keyboard layouts differ from the Windows keyboard layouts.

  • The Command key on the Mac keyboard equals the Windows key.
  • To perform actions that use the Command button on the Mac, you will need to use the control button in Windows (e.g.: Copy = Ctrl + C).
  • The function keys can be activated in the session by pressing additionally the FN key (e.g.: FN + F1).
  • The Alt key to the right of the space bar on the Mac keyboard equals the Alt Gr/right Alt key in Windows.

Microsoft Remote Desktop On Mac To Pc

By default, the remote session will use the same keyboard locale as the OS you're running the client on. (If your Mac is running an en-us OS, that will be used for the remote sessions as well.) If the OS keyboard locale is not used, check the keyboard setting on the remote PC and change it manually. See the Remote Desktop Client FAQ for more information about keyboards and locales.

Support for Remote Desktop gateway pluggable authentication and authorization

Windows Server 2012 R2 introduced support for a new authentication method, Remote Desktop Gateway pluggable authentication and authorization, which provides more flexibility for custom authentication routines. You can now try this authentication model with the Mac client.

Important

Custom authentication and authorization models before Windows 8.1 are not supported, although the article above discusses them.

To learn more about this feature, check out https://aka.ms/paa-sample.

Tip

Questions and comments are always welcome. However, please do NOT post a request for troubleshooting help by using the comment feature at the end of this article. Instead, go to the Remote Desktop client forum and start a new thread. Have a feature suggestion? Tell us in the client user voice forum.